ENVO D50 | ST50 EBIKE MANUAL | VERSION 1.0 39
Brakes Brakes making noise Brake pads are rubbing on
the rotor
Pads need to be
adjusted. Losen the
mounting bolts until
the calipers are free to
move, adjust the caliper
such that rotor does not
rub against the brake
pads when the brake is
not applied. Tighten the
bolts to keep the caliper
in its place.
Brakes not bedded in
properly, material buildup
is causing noise
Lightly sand and clean
rotors and pads. Bed in
your brakes
Fenders Front fender is making
noise
Front fender is too close
to the tire and is rubbing
Fender needs to be
adjusted, try lifting it
up and moving it away
from the tire, may need
some slight bending,
make sure you have
secured it in its highest
position
To Next Page
Loading...
