ENVO E50 - Maintenance of Your Scooter; Maintaining Scooter Parts

ENVO E50 | E35 SCOOTER MANUAL | VERSION 1.0
27
6. MAINTENANCE
6.1. MAINTAINING PARTS
• Electric Scooters need regular maintenance to function properly.
• In this manual we provide important basic guidelines on how to maintain and inspect your
scooter. We cannot teach you everything you need to know to properly inspect and service your
scooter. That is why we repeatedly urge you to take your bicycle to a professional for service
and repair.
• Make sure the tires are correctly inated, check them by using a tire pressure gauge
• Your scooter should be periodically cleaned, and tires should be changed when tread is below
manufacturers recommended tread depth
• Never inate a tire beyond the maximum pressure marked on the tire’s sidewall. Exceeding the
recommended pressure may blow the tire off the rim which could cause damage to the bike
and serious or fatal injury to the rider and injury to bystanders
• We recommend that you frequently check the kickstand and tighten the bolt as the high stress
put upon by the spring can cause the bolt to loosen over time
• The brakes may get loose over time, you can adjust the disc and drum brake tightness by
increasing the tension in the brake wire.
• If you feel play in the handlebar, use the allen key to tighten the screws.