EasyManua.ls Logo

ENVO E50 - Preparing for Your First Ride

ENVO E50
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENVO E50 | E35 SCOOTER MANUAL | VERSION 1.0
6
Figure 2A Figure 2B
2.3. BEFORE YOUR FIRST RIDE
If you have an impairment or disability such as visual impairment, hearing impairment, physical
impairment, cognitive impairment, and/or a seizure disorder, consult your physician before
riding any ENVO Drive Systems product
Before going on your rst escooter adventure, take time to get familiar with your escooter.
Make sure everything on the escooter is secured and tight, the handlebar clamps are locked,
and there is no play in any part
Check if you are able to turn the handlebar while the wheel is held in place Figure 2A
Check if the handle bar is secured to the stem and the grips are tight by trying to twist the bars
forward and backward Figure 2B
Ride around a quiet area at the lowest speed mode setting, get familiar with your brakes and
settings
Be sure to bed in the brakes (See Brakes, Section 5.5.). Failure to do so will result in lower than
optimum braking performance and can lead to squealing

Related product manuals