EOPTIS SRL
Via Alto Adige, 152 38121 Trento (TN) ITALY
Tel.: +39 0461 260 552 Fax: +39 0461 260 617
www.eoptis.com info@eoptis.com
Page 18 of 29
CLM-194
Rev. 1.05 - 06/2014
Copyright © 2013-2014 EOPTIS SRL
5.4.2 USING THE INTERFACE
The acquired colour is displayed on monitor the as a guide only. It is very likely that it will appear
to be different from the actual colour of the sample. This is due to several factors (such as the
ambient light, monitor calibration, gamma settings) which must be controlled and fine tuned in
order for the colours to match.
The Colour Matching function shows the References ranked according to the CIELAB difference of each Reference with
respect to the current Measure. The search will be performed among colours belonging to the group selected by the
Reference group selector . To search all colors from the Reference list, select the ALL option. More info about the
management of colour groups can be found in §5.9.1.
To Next Page
Loading...