1.Safety Operation Regulation
1
1.1 Requirement on operator
The truck must be operated by trained person, who can demonstrate the moving and operating of the truck to
user and can instruct vividly the user how to operate the truck. During operation, the operator must be
responsible for the truck and prevent unauthorized person in driving or operating the truck. The truck is strictly
forbidden to lift or carry person.
1.2 Failure and fault
In case of any failure or fault, please notify the administrator immediately. In case that truck can not work safely
(such as wheel worn-out or brake fault), please stop using the truck until they are properly repaired.
1.3 Danger area
Danger area refers to: the area where the truck or its lifting device (such as fork or attachment) is working or
lifting, which brings potential dangerous factors to person; or the area for load transportation. Generally, the
range of danger area extends to the point of load lowering or truck attachment lowering.
Unauthorized person must be kept away from danger area. For any circumstance with potential danger to
person, the operator must give warning notice. If someone still stays in danger area while being requested to
leave, the operator must stop the truck immediately.
1.4 Safety device and warning signs
Enough importance should be attached to safety device, warning sign and warning notice introduced above in
Operation Instruction.
The truck should always be driven with the height of forks less than 300mm except when placing or removing
load!
1.5 Passengers
Never ride on the truck or let any one else ride.
1.6 Keep Distance
The truck should not be driven on public roads outside a specific area. Remember that the vehicle in front of
you may brake suddenly. Keep a reasonable distance.
1.7 Visibility
The operator must stare at driving direction to ensure legible sight for the road condition ahead. In case that
cargo carried interrupts the sight, reverse driving is requested. If it doesn’t help in this way, there must be
another person walking ahead of truck to give guidance and warning.
1.8 Operation protection
Keep your hands and feet away from all moving parts such as forks and wheels
, .
1. AFETY OPERATION REGULATION
2. CONTROL BAR ASSEMBLY LNSTRUCTION page 4
3. OPERATION INSTRUCTIONS page 5
4.TECHNICAL SPECIFICATION page 10
5. MAINTENANCE OF THE TRUCK page 11
6.MAINTENANCE PROCESS page 22
7. PARTS LIST WITH DRAWINGS page 31
S page 2
To Next Page
Loading...
Need help?
General
