Eoslift W20 Series User Manual

8
9
4.Technical specification
AC 1.5
DC 2
3PZS210(Maintenance-free)
24/210(140/70)
￠73X98/80X58
￠115X55/252X67
200(100/50)
kg
kg
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
km/h
mm/s
mm/s
%
kw
kw
V/Ah
Lb
W20
2000
600
1375
610/510/460
PU
2（4）/1+1
110
870/1220
85
1730
720
540/685
2140
2100
1655
3.5/3.5
56/60
57/59
5/7
1150/1200X180X55
5. Maintenance of the Truck
5.1 Safety Operation and Environmental Protection
The instructions in the chapter of “ Operation of Inspection and Maintenance” should be
performed based on the time interval specified in Maintenance List.
Any part on the truck, especially safety device, can not be changed without permission. Change of
operation speed of the truck is strictly forbidden.
All spare parts from original manufacturer are qualified by Quality Assurance Authorities. To ensure
the safety and reliability of truck operation, only spare parts from manufacturer can be applied. The
parts replaced, including oils and fuels, must be disposed according to related environmental
protection regulations.
5.2 Safety Rules for Maintenance of Pallet Truck
Maintenance staff: Repair and Maintenance of the truck should only be performed by qualified
professionals trained by manufacturer. The after-sales service department of manufacturer has
dispatched special technicians who can be commissioned to sign on the maintenance record in the
maintenance service appointed by manufacturer.
Lifting of truck: For lifting of the truck, the hoisting equipment should be safe and reliable (especially
the hoisting position). When the truck is lifted, necessary measures should be taken to avoid slip and
turnover of the truck (wedge block or wood block can be applied). The truck can be lifted by hoisting
equipment only when the forks are fixed and connecting cable with enough strength is applied.
Cleaning operation: Flammable fluid is strictly forbidden in cleaning of the truck. Before cleaning work starts,
safety measures must be taken to avoid sparkle (e.g. caused by short circuit). Any operation of battery
should be performed after cutting off the power of the battery. All electric elements and electronic assemblies
can only be cleaned by weak wind blower or compressed air, or by in conductive and anti-static brush.
If the truck is cleaned by water jet cleaner or high pressure cleaner, all electric elements and electronic
assemblies should be covered in advance to avoid humidity which will cause fault of function. Cleaning by
steam nozzle is prohibited.
Operation of electrical system: Operation of electrical system of the truck should be
performed by trained professionals only. Before any operation of electrical system, protection measures to
avoid electric shock should be properly taken. During operation of battery, separate the socket of battery
apart to cut off the power of the truck.
Operation of Welding: To avoid damage of electric and electronic assemblies, the assemblies should be
removed away from the truck before welding.
Installation: After repair or replace the hydraulic components, electric elements and electronic assemblies,
please install and confirm them at original positions.
Wheels: The quality of wheels take great effect on the stability and driving performance of the truck. Any
change of wheels should be discussed with and approved by the manufacturer. During replacement of
wheels, the truck must be kept horizontally as original state (wheels must be replaced by pairs, e.g. both
left and right).
Lifting chains: Without lubrication, the lifting chains will be soon worn out. The time interval in maintenance
manual is applicable for normal operation condition. In case of poor operation condition (dust, temperature),
it is necessary to feed lubrication regularly.
Hydraulic oil pipe: Oil pipe should be replaced every six years. Together with replacement of hydraulic
assembly, the oil pipe of hydraulic system should be replaced.
5.3 Maintenance and Inspection
Complete and professional maintenance is an important part for safety operation of pallet truck. Any
negligence of maintenance of stipulated time interval will cause failure of truck and cause potential danger to
person and equipment.
The maintenance cycle stated in instruction manual refers to the normal condition with single shift operating.
Under dusty condition, temperature varying greatly or under multiple shifts operating, the maintenance cycle
should be shortened.
— Check if any loosened nut on wheels and tighten it if necessary
— Check if any leakage of hydraulic parts and tighten it if required
— Replace hydraulic filter

Eoslift W20 Series Specifications

General

Brand	Eoslift
Model	W20 Series
Category	Trucks
Language	English