EP Equipment EPL152 - Battery Charging Procedures; Charging Precautions; Internal Charger Use

REV. 03/2020
2C
3.2 Battery charging
•The truck must be parked within a shady and ventilated room;
•Do not place metal objects on the battery;
•All the cable and plug connection parts should be inspected in terms of obvious damages
before charging;
•The plugs on the battery cells must always be dry and clean.
•The surface of the battery cells must be clear to ensure su󰀩cient.
Charging environment:
3.2.2 Charging the battery with internal
charger
Charge maintenance-free or lithium battery
through a built-in charger
•Inspect whether relevant charging
requirements are satised according to
“3.2.1 precautions”;
•
Park the truck securely as described 2.3.5
;
•
Open the upper cover(1) for EPL185
;
•Pull out the power plug (2) and have it
inserted into a properpower supply.
3.2.1 Precautions
Lithium battery must be charged above 0°C, as excessively low charging temperature
is likely to result in the short circuit of battery cell.
WARNING
3
EPL154/EPL185
EPL163