REV. 03/2020
4
D
After operating for 1000 hours in total, the truck should also be maintained according to the
following procedures in addition to the 250-hour maintenance, 500-hour maintenance and 1000-
hour maintenance mentioned above
22
Inspect the running, lifting and lowering speed, braking distance and other
operation performances of the truck Inspect and add gearbox lubrication grease
24
Inspect where there is any damage in the oil cylinders and whether
corresponding installations are reliable
25L
Clean the oil tank and replace the hydraulic oil
26
Inspect and replace the hydraulic lter
27
Inspect whether the bearing capacity reaches the rated load and implement
corresponding adjustment through the ood valve adopted in the hydraulic
station
28 Inspect whether all the labels are clear and intact
Table 1 Lubricants
Code Type Specication Amount Position
A
Anti-wear hydraulic oil L-HM32
180-200mL
Hydraulic
System
Low temperature anti-wear
hydraulic oil (cold storage)
L-HV32
B
Multi-purpose grease
Polylub
GA352P
Appropriate amount
Sliding surface
(See Table 2)
C
Grease 3#(MoS
2
) - 110 grams Gearbox
A
A
C
C
EPL163/EPL152
EPL163/EPL152
EPL154/EPL185
EPL154/EPL185
Hydraulic oil injection nozzle
Grease
To Next Page
Loading...
