( 7 )
GB-6210 Manual
3-1 Installation Precautions
3-1-1. Place the machine in a flat space. Avoid places where table and foundation are
unstable.
3-1-2. Keep the machine away from direct sun light.
3-1-3. Keep the machine away from high temperature and humidity.
3-1-4. Keep the machine away from lots of dust.
3-1-5. Keep the machine away from magnetic or magnetized apparatus.
3-1-6. Do not put many loads on one electrical outlet.
3. Before Operation
3-2 Operation Precautions
3-2-1. Do not touch melted glue or melt tank or roughing cutter with your finger or
hand. They are so hot that they cause severer skin burn.
3-2-2. Do not supply too much glue in melt tank.
3-2-3. When the machine is not used, turn off power switch for preserving glue quality.
Deterioration pace of glue is proportional to time length during glue is melted.
3-2-4. Absolutely do not open any covers and disassemble or modify the machine.
3-2-5. Do not let fall down some thing small into the machine.
To Next Page
Loading...