REV. 12/2020
19
B
If the equipment has an initial lift control,
separate the goods from the racking. To
maintain maximum stability, never use the
initial lift control, to avoid overloading the
equipment.
CAUTION
Picking up a load at height
Carefully drive the machine to the required
location.
Raise the forks to the height of the pallet.
Carefully move the forks forward under the
pallet.
Lift the forks until the pallet moves away from
the racking.
Reverse the truck to free the pallet.
Lower the goods again until they are a few
centimeters away from the ground.
Fig2108-00031OM
To Next Page
Loading...
