REV. 12/2020
18B
Stacking a load
DANGER
Setting a load down on the ground
Carefully move the load into the deposit area.
Lower the load until the fork arms are free.
Move the forks straight back.
Lift the forks a few centimeter again.
Be careful not to touch nearby loads or those
behind the equipment.
Do not touch nearby loads or loads positioned
behind the equipment.
Before you remove the load, ensure that there
are no people in the vicinity.
CAUTION
CAUTION
CAUTION
Personnel must not stand under or near the
truck when the load is in the raised position.
Carefully drive the machine to the required
location.
Raise the forks clearly above the level
where the load is to be placed.
Drive the truck backward into the racking.
Lower the load until the fork arms are free.
Move the forks straight back.
Lower the forks again until they are a few
centimeters away from the ground.
Fig2108-00030OM
To Next Page
Loading...
