REV. 12/2020
12D
Adjustment
Park the truck with replacement completed
on level ground to see if the casters and
drive wheel can both be in contact with the
ground;
When the truck is running, check if the caster
is functioning properly.
After long time of use, the drive wheel
will wear and tear to certain level, at this
time, adjust the height of caster(3) through
increasing or decreasing the number of
adjustment shims(2) to make the two casters
and drive wheel to be in close contact with
the ground.
Upon maintenance or replacement for parts
of the caster, please refer to two gures as
below:
To Next Page
Loading...
