EasyManua.ls Logo

ep EST122 - Troubleshooting Common Faults

ep EST122
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REV. 12/2020
13D
If the fault cannot be rectied after carrying out the remedial procedure, notify the Manfacture's se-
vice department, as any further troubleshooting can only be performed by specially trained and
qualied service personnel.
Fault Probable Cause Action
Truck does
not start.
–Battery cables not plugged
in
–Key switch in “0” position
–Battery charge too low
–Faulty fuse
–Truck in charge mode
–Check the battery cables and
connect if necessary.
–Set key switch to “I”
–Check battery charge, charge battery
if necessary
–Check fuses.
–Interrupt charging
Load cannot
be lifted
–Charging capacity too low
–Truck not operational
–Hydraulic oil level too
low
–Charging the battery
–Carry out all measures listed under
“Truck does not start”
–Check the hydraulic oil level
Troubleshooting
Final decommissioning, disposal:
The nal scrap treatment of the forklift must be implemented according to the current laws
and regulations of China, especially the provisions related to such aspects as storage battery,
consumables, fuel oil and electric equipment
.

Related product manuals