Why is my Epever Controller not working even though the wiring is correct?
If the wire connection is correct, but the Epever Controller is not working, the battery voltage may be lower than 8V. Please check the battery's voltage and ensure it is at least 8V to activate the controller.
What to do if Epever Tracer5415AN Controller is used in area with lightning strikes?
If you plan to use the Epever Controller in an area prone to frequent lightning strikes, it's advisable to install an external surge arrester.
How to fix a charging LED that is OFF on my Epever Controller during the day?
If the charging LED is off during the daytime when sunshine falls on PV array properly, it may be due to a PV array open-circuit. Confirm whether the connection of the PV array is correct and tight.
How to prevent battery reverse polarity on Epever Tracer5415AN?
Do not connect the battery wires with reverse polarity, as this may damage the Epever Controller.
General| Model | Tracer5415AN |
|---|---|
| Type | MPPT Solar Charge Controller |
| Rated Charge Current | 40A |
| Rated Load Current | 20A |
| System Voltage | 12V/24V Auto |
| Max. PV Open Circuit Voltage | 100V |
| Max. PV Input Power (12V) | 520W |
| Max. PV Input Power (24V) | 1040W |
| Efficiency | ≤98% |
| Temperature Compensation | -3mV/°C/2V(Default) |
| Altitude | ≤3000m |
| Communication | RS485 |
| Protection | Overload, Short Circuit, Reverse Polarity, Over Temperature |
| Cooling | Natural Cooling |
| Humidity | ≤95% (non-condensing) |
General safety and handling precautions to be observed during installation.
Specifies requirements for PV module configuration and voltage for different models.
Table detailing recommended maximum PV array power and open-circuit voltage.
Guidance on controller mounting, clearance, and ventilation for safe operation.
Instructions for removing covers and connecting battery and PV wiring.
Covers grounding procedures and connecting accessories like sensors.
Details connecting sensors, RS485, and the power-on sequence.
Guide to selecting the correct battery type (lead-acid or lithium) via LCD or software.
Details voltage control parameters for lead-acid batteries in different systems.
Details voltage control parameters for lithium batteries.
Details various protection functions like PV limiting, short-circuit, and reverse polarity.
Provides solutions for common faults like charging issues and battery status.
Safety warnings for performing maintenance, emphasizing power disconnection.
To Next Page