18
CP4B Room Thermostat
Copy Function
Copy function may only be used if the thermostat is in the 7d mode.
Set the times and temperatures for the day that you wish to copy from
in the programming mode.
When still on the day press the
COPY
button.
The day of the week that you have selected will be shown with ‘COPY’
below it.
The next day will begin to ash on the top of the screen.
Press the
button to copy the times and temperatures to that day.
Press the
button to skip that day.
You can copy to multiple days using the
button.
Press the
OK
button when copying has been completed.
To Next Page
Loading...
