20
CP4B Room Thermostat
Press the
BOOST
button, one two or three times.
The time that the thermostat will boost to will ash on the screen.
Press the
OK
button.
The temperature will now ash. Adjust the boost temperature setpoint
by pressing the
or buttons.
Press the
OK
button or wait for 5 seconds for the boost to activate.
‘BOOST TO’ will now be displayed on the screen with the time that the
thermostat is activated to, displayed above the text.
Press the
BOOST
button again to deactivate the boost.
Boost Function
If you do not press any button after pressing the boost button, the boost
will activate to a default boost setting of 21C.
To Next Page
Loading...
