EPH Controls CP4B - Temporary Override; Permanent Override

19
www.ephcontrols.com
When in AUTO mode, press the or buttons to adjust the
temperature setpoint. ‘OvEr’ will appear on the screen.
Press
OK
or after 5 seconds the thermostat will operate to this
temperature setpoint, until the next switching time.
To cancel temporary override, press the
OFF
buttton and then press the
AUTO
button to return to the automatic mode.
Press the
MAN
button to enter the manual mode (Permanent Override),
‘MAN’ will appear on the screen.
Press the or buttons to adjust the temperature setpoint.
Press
OK
or after 5 seconds the thermostat will operate in this mode.
To cancel permanent override, press the
OFF
buttton to turn the
thermostat o or press the
AUTO
button to return to the automatic mode.
Temporary Override
Permanent Override