EPH Controls CP4B - Page 37

35
www.ephcontrols.com
Parameter Description Range Default
HHCH t-1 Maximum set point heating 45 - 85˚C 85˚C
LLCH t-2 Minimum set point heating 10 - HHCH˚C 45˚C
CLI t-3
This allows users to select dierent
climatic curves for weather compensation.
This only applies to boilers with an outside
sensor connected.
0.2 - 3.0 1.2
InFL t-4
Inuence of room sensor on modulation
of the boiler. Recommended value is 10.
0 - 20 10
HHbO t-5
Maximum allowable CH water setpoint.
(˚C)
ID49 Max ≥ID57
≥ID49 Min
85˚C
Exit
Press OK button to turn back to main
interface.