10
R17
V2
The R17
V2
timeswitch has up to three daily heating programs called P1, P2 and P3. See Page 13 for
instructions on how to adjust the program settings.
Within these sections you can see what mode the timeswitch is currently in.
When in the AUTO mode, it will show when the timeswitch is next programmed to be switched ON or
OFF.
For ‘Mode Selection’ please see page 11 for further explanation.
When the timeswitch is ON, you will see the red LED light up. This indicates that power is being sent
from the timeswitch.
Quick introduction to your R17
V2
Timeswitch:
To Next Page
Loading...
