14
R17
V2
Press
PROG
.
Press
OK
to scroll through the periods for the individual day (block of days).
Press
Select
to jump to the next day (block of days).
Press
MENU
to return to normal operation.
Reviewing the Program Settings
The timeswitch can be boosted for 30 minutes, 1, 2 or 3 hours while it is in the AUTO, ALL DAY & OFF
mode.
Press
Boost
1, 2, 3 or 4 times, to apply the desired BOOST period.
When a
Boost
is pressed there is a 5 second delay before activation where ‘BOOST’ will ash on the
screen, this gives the user the time to select the desired BOOST period.
To cancel a BOOST, press
Boost
again.
When a BOOST period has ended or has been cancelled, the timeswitch will return to the mode that
was previously active prior to the BOOST.
Boost Function
Note: A BOOST cannot be applied while in the ON or Holiday Mode.
To Next Page
Loading...
