EPH Controls R17 - Adjust the Program Setting in 5;2 Day Mode

13
EPH Controls Ltd.
Press
PROG
.
Programming for Monday to Friday is now selected.
Press
and to adjust the P1 ON time. Press
OK
.
Press
and to adjust the P1 OFF time. Press
OK
.
Repeat this process to adjust P2 and P3 times.
Programming for Saturday to Sunday is now selected.
Press
and to adjust the P1 ON time. Press
OK
.
Press
and to adjust the P1 OFF time. Press
OK
.
Repeat this process to adjust P2 and P3 times.
Press
MENU
to return to normal operation.
While in programming mode, pressing
Select
will jump to the next day (block of days) without
changing the program.
Adjust the Program Setting in 5/2 Day Mode
Note:
1. To change from 5/2d to 7D or 24H programming, refer to page 16, Menu P01.
2. If you don’t wish to use one or more of the daily programs then simply set the start time and end time to be
identical. For example, if P2 is set to start at 12:00 and end at 12:00 the timeswitch will simply ignore this program
and proceed to the next switching time.