22
R17
V2
Copy function can only be used when the 7d mode is selected. (See page 16 to select 7d mode)
Press
PROG
to program the ON and OFF periods for the day for the week you want to copy.
Do not press OK on the P3 OFF time, leave this period ashing.
Press
ADV
, ‘COPY’ will appear on the screen, with the next day of the week ashing.
To add the desired schedule to this day press
.
To skip this day press
.
Press
OK
when the schedule has been applied to the desired days.
Ensure the timeswitch is in the ‘Auto’ mode for this schedule to operate accordingly.
Copy Function
To Next Page
Loading...
