Epilog Laser Fusion Pro 32 User Manual

8. Use a ratcheting strap and more of the internal foam from the crate to provide protection against
the door opening.
9. Position the hooks as close to the front corners of the opening for the side covers as possible. Use
washcloths or small towels to cushion that area if needed. Tighten the ratcheting strap as much as
possible.
- 169 -
SECTION 10: SYSTEM MAINTENANCE

Epilog Laser Fusion Pro 32 Specifications

General

Brand	Epilog Laser
Model	Fusion Pro 32
Category	Engraver
Language	English