Epilog Laser Fusion Pro 32 User Manual

2. Once the Device Manager opens, click on “Display Adapters” to reveal your graphics card. Right
click on the graphics card and select “Update driver”.
3. Choose which way you want to search for an update for your driver and then update the driver.
4. Restart your computer and open the Job Manager. If the problem persists, contact Technical
Support.
- 53 -
SECTION 4: THE JOB MANAGER

Epilog Laser Fusion Pro 32 Specifications

General

Brand	Epilog Laser
Model	Fusion Pro 32
Category	Engraver
Language	English