To Next Page

To Previous Page

Safety and operating instructions

Original Instructions

12.3 Noise declaration statement

MB750E MB1000E MB1200E

Sound pressure

dB(A) 95 96 94

Sound power

dB(A) 124 125 124

MB1500E MB1650E

Sound pressure

dB(A) 98 98

Sound power

dB(A) 128 128

Sound pressure level according to EN ISO 3744 in accordance with directive 2000/14/EC at 10metres distance.

Guaranteed sound power according to EN ISO 3744 in accordance with directive 2000/14/EC inclusive spread in pro-

duction.

These declared values were obtained by laboratory type testing in accordance with the stated directive or standards and

are suitable for comparison with the declared values of other tools tested in accordance with the same directive or stan-

dards. These declared values are not adequate for use in risk assessments and values measured in individual work

places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and de-

pend upon the way the user works, in what material the breaker is used, as well as upon the exposure time and the

physical condition of the user, and the condition of the breaker.

We, Construction Tools GmbH, cannot be held liable for the consequences of using the declared values, instead of val-

ues reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no con-

trol.

Epiroc MB Series User Manual

Questions and Answers: