Epiroc SmartROC T40 - User Manual

Other manuals for Epiroc SmartROC T40

Maintenance160 pages

Questions and Answers

K
Karen RobinsonJul 26, 2025
Why is my Epiroc Industrial Equipment not cooling well?
- G
  George RayJul 26, 2025
  If your Epiroc Industrial Equipment isn't cooling well, several factors could be the cause. You should check the fresh-air fan and V-belt tension. Also, verify that air is passing through the evaporator in the unit. Ensure the evaporator and condenser aren't clogged and that the air intake filter isn't dirty. Additionally, confirm the expansion valve capillary tube is firmly tightened against the evaporator outlet pipe and check that the thermostat isn't cutting out too early.
T
Troy AndradeAug 10, 2025
How to troubleshoot uneven cooling in Epiroc SmartROC T40?
- A
  Anthony FlynnAug 10, 2025
  To troubleshoot uneven cooling in your Epiroc Industrial Equipment, start by checking that the connections to switches, magnetic coupling, or pressure switch are not loose. Also, make sure that the expansion valve is not clogged.
J
John MasseyAug 16, 2025
What to do if Epiroc SmartROC T40 Industrial Equipment has no cooling at all?
- L
  Lisa SmithAug 16, 2025
  If your Epiroc Industrial Equipment has no cooling at all, you should check the fuses, electrical connections, compressor ground, electro-magnets, switches, and pressure switches. Also, check the V-belt and compressor. Check the expansion valve and temperature control valve. Finally, check the coolant hoses.
V
vcrawfordNov 1, 2025
What to do if my Epiroc SmartROC T40 Industrial Equipment is making abnormal noises?
- P
  Patricia MartinezNov 1, 2025
  If your Epiroc Industrial Equipment is producing abnormal noise, several factors could be the cause. Start by checking that the multi-V-belt to the compressor is properly tightened and that the compressor retaining bolts are secure. Ensure the system is filled sufficiently but not overfilled. Verify the expansion valve is in working order and that the airflow across the evaporator and condenser is sufficient and the condenser is clean. Abnormal system noise can also be related to incorrectly assembled components. If the compressor is noisy at a certain speed and the noise disappears when the speed increases or decreases, there is probably nothing wrong with the compressor itself. The difference between the pressure on the suction side and the pressure side also affects the level of noise. ...