SmartROC T35/T40 5 Safety Functions
21 No: 5966599819.1.5966707083 en-US
Emergency Stop on Winch Control Unit - SmartROC T35, T40, T45, C50, FlexiROC T45
Emergency Stop on Radio Control Unit - SmartROC T35, T40
5.1.2 Resetting Emergency Stop
!
NOTE: Reset the emergency stop only if it is safe to start the machine or resume work.
1.
If the emergency stop is a knob, turn the pressed emergency stop in the direction of
the arrows. This action causes the button to release. For a non-rotational button with-
out directional arrows, pull the emergency button that has been activated.
2.
Press the reset button (A) in the cab.
3.
Restart the machine as per the start-up instructions.
To Next Page
Loading...
Need help?
General
