SmartROC T35/T40 7 Noise and Vibration
33 No: 5966599819.1.5966707083 en-US
7.7 Factors Affecting Whole Body Vibration
The following factors may affect whole body vibration:
• Tramming for longer duration.
• Speed, duty cycle, and ground conditions while operating from a cab or canopy. These
factors are primarily influenced by the operator who controls for example, speed, work-
ing cycle, and route options.
7.8 Vibration Reduction
• Do not expose the machine to higher loads, speeds, or performance factors than spec-
ified. Excessive loads and mechanical wear increase vibration.
• Use the machine correctly together with related equipment required for the task. Use
of incorrect equipment can cause increase vibrations.
• Using remote control can reduce vibrations.
• Avoid large holes and uneven ground when tramming. Adapt the speed to the tram-
ming conditions to reduce vibrations.
To Next Page
