13
8. Add foam agent
Use your fingers or tools to reach under
the filling box and pull out the filling box.
(it is recommended to use a filling funnel,
as shown below)
Put the funnel into the filling port, hold it,
and slowly pour the foam liquid into the
funnel with the other hand. (Do not quickly
pour the foam liquid into the funnel to
avoid the foam liquid overflowing)
Filling funnel
Foaming agent
Reminder:
In order to achieve the best effect and
prolong the service life of the foam shield,
please use our special foam agent for
smart toilets
Close the sealing cap and press tightly,
then push the filling drawer to the end.
(If the foam liquid overflows during the
liquid addition process, use a paper to
dry the liquid before pushing it in)
Sealing cap
Connect the water supply hose of the
toilet tank and the water inlet hose of the
toilet seat to the three-way angle valve as
shown in the figure.
Connect the hoses7.
Connect the water inlet
hose of the toilet seat
Connect the water supply
hose of the toilet tank
the water supply hose
of the toilet tank
the water inlet hose
of the toilet seat
To Next Page
Loading...
