EasyManua.ls Logo

EPLO EP-U9MAX - Description of the Knob Function

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Reminder: Just after starting up, all function gears default to the middle gear; if you use the
remote control, it will switch to the function gear set by the remote control.
Description of the knob function
Push the knob
Anticlockwise
rotation
Clockwise
rotation
In the seated state, turn the knob clockwise to start the feminine wash
function, and turn it counterclockwise to start the rear wash function.
If you short press the knob during cleaning, the current function will
be stopped.
Knob indicator
Rear wash/
front wash
Knob
definition
Knob
function
White Turn off
When rear/front washing, turn the knob clockwise to move the nozzle
position forward, and turn the knob counterclockwise to move the
nozzle position backward.
Long press the knob to switch to water pressure adjustment, turn
clockwise to increase the water pressure, counterclockwise to
decrease the water pressure, long press the knob again to switch to
nozzle position adjustment.
When seated and the function is not turned on, long press the knob to
start the warm air function. Short press the knob during the warm air
process to stop this function.
In the warm air state, turn the knob clockwise to increase the air
temperature level, and turn the knob counterclockwise to decrease
the air temperature level.
In the state of leaving the seat, turn the knob clockwise to start the
nozzle manual cleaning function; short press the knob to stop the
manual cleaning function, and the nozzle retracts.
In normal working mode, when there is no cleaning, drying or nozzle
cleaning function, shortly press the knob to start the flushing function.
In standby mode, press the knob to enter normal working mode.
In normal working mode, when leaving the seat, press and hold the
knob, the main unit enters standby mode, all functions are turned off,
and the indicator light goes out.
Nozzle position
adjustment and
cleaning water
pressure
adjustment
Warm air
function and
air temperature
adjustment
Nozzle cleaning
Flush function
Operating mode
Standby mode

Related product manuals