09
5. Ceramic toilet installtion
Install a sealing flange into drain outlet.
Install ceramic toilet on the corresponding
position.
Note: Two people are required to carry the
toilet.
Sealing flange
Toilet drain outlet
Connect the other end of hose to angle
valve and tighten the connection.
7. Connect hose to angle valve
8. Glass glue application
Note:
Please clean up the drain outlet;
Please make sure ceramic toilet outlet sits
perfectly on drain outlet.
Glass glue
Apply high quality mildew-proof glass glue
around the lower edge of the toilet.
6. Screw installation
Put the screw through the fixing sleeve and
then install it through the holes(on both
sides of the toilet ceramic) to the mounting
bracket on the ground, and lock tight with a
tool.
Put the decorative cap on the fixing sleeve.
Fixing sleeve
Screw
Decorative cap
To Next Page
Loading...
