EasyManua.ls Logo

EPLO G20PRO - Troubleshooting Remote and Unused Product; Remote Control Failure; Product Unused for Extended Period

EPLO G20PRO
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
1. Operate via buttons on the main unit
Failure of remote control
2. Battery replacement
Remove the remote control from holder.
Open the battery cover and replace the
batteries.
Note: After battery replacement, the remote
control settings will be restored to the
defaults. Please reset.
Put the remote control back.
Product unused for a period of time
When the product is left unused for a long
time, especially in cold weather, it is highly
recommended to drain the water to prevent
freezing.
To discharge water
2. Activate flushing, and then turn off angle
valve to stop water supply.
3. Disconnect the hose from angle valve,
drain the water and reconnect.
1. Unplug and cut off the electricity
4. For your safety, it is recommended to put
antifreeze into the remaining water in the
bowl.
NoteBefore water discharging,
the power must be cut off.
Note: Please turn on power and water supply
when using again.

Other manuals for EPLO G20PRO

Related product manuals