E+L RK 4004 User Manual

U Page 56
Digital controller RK 4004
1.2.1. reserved 121
Not assigned at present.
1.2.2. reserved 122
Not assigned at present.
1.2.3. reserved 123
Not assigned at present.
1.2.4. reserved 124
Not assigned at present.
1.2.5. !! Service !!
This parameter serves only as a parameter title for the following pa-
rameters that are grouped together due to their function. The para-
meter itself has no function.
1.2.6. service off/on
For E+L service personnel only.
Service mode is started via value "1". Following a reset the value is
automatically reset to "0".
1.2.7. >service mode
For E+L service personnel only.
2 = Square wave current controller test
3 = Delta wave current controller test
4 = Square wave speed controller test
5 = Delta wave speed controller
6 = Square wave PWM bridge signal
7 = Delta wave PWM bridge signal
8 = Square wave set position value
9 = Delta wave set position value
1.2.8. testvalue 1
For E+L service personnel only.
1.2.9. testvalue 2
For E+L service personnel only.
1.3.0. testcycletime
For E+L service personnel only.

E+L RK 4004 Specifications

General

Brand	E+L
Model	RK 4004
Category	Controller
Language	English