Centrifuge 5804/5804 R and 5810/5810 R
1 Safety precautions
1-2 Safety precautions
Risk to persons
Risk of damage to device
Danger! Electric shock.
→ Switch off the device and disconnect the mains power plug before opening the
device, performing work on electrical connections or starting maintenance or
cleaning.
Risk of explosion!
→ Do not operate the device in rooms where work is being carried out with explosive
substances.
→ Do not use this device to process explosive or highly-reactive substances.
Warning! Risk of injury from trapping or crushing.
→ When closing the device lid, do not place your fingers between the lid and the
device, otherwise they may be trapped.
Warning! Damage due to incorrect power supply.
→ Only connect the device to power sources which match the details on the device
ID plate.
→ Use only sockets with protective earth.
Caution! Poor safety due to incorrect accessories.
The use of accessories and spare parts other than those recommended by Eppendorf
may impair the safety, function and precision of the device.
Eppendorf refuses to accept any warranty and liability for damage caused by third-
party parts.
→ Use only original accessories recommended by Eppendorf.
Caution! Poor safety due to missing operating manual.
→ When passing on the device, always enclose the operating manual.
→ If you lose the operating manual, request a replacement. The current version of
the operating manual and the safety instructions in your language can also be
found on our website, www.eppendorf.com
.
MSTM/0408