Eppendorf 5804 - Control Pad Spare Parts; Lid Latch Spare Parts

Centrifuge 5804/5804 R and 5810/5810 R
7 Spare parts list
7-14 Spare parts list
1 7-3 Phillips screw for lid, 50 long x x 0110 000.995
1 7-3 Phillips screw for lid, 50 long x x 0110 001.142
1 7-4 Reinforcement for lid mat x x 5804 160.304
1 7-4 Reinforcement for lid mat x 5810 160.308
1 7-4 Reinforcement for lid mat x 5811 160.301
14 7-5 Lower part of lid 5810, with rim and bore* x 5810 160.529
13 7-5 Lower part of lid 5804, with rim and bore* x 5804 160.525
7-5 Lower part of lid 5804 R, with rim and monitor glass* x 5805 160.529
7-5 Lower part of lid 5810 R, with rim and monitor glass* x 5811 160.522
* Note: Retrofit upper and lower part of lid together.
1 7-7 Sealing for lid 5810 x 5810 130.107
1 7-7 Sealing for lid 5804 x 5804 130.103
1 7-7 Sealing for rotor chamber 5804 R x 5805 130.107
1 7-7 Sealing for rotor chamber 5810 R x 5811 001.041
3 7-8 Sliding plate, Pertinax x x x x 5810 110.017
1 7-9 Lid hinge x x x x 5810 855.055
8 Mains input
3 8-1 Mains switch 16 A (230 V vers.) x x x x 0113 200.812
3 8-1 Mains switch with thermal fuse (120 V vers.), 15 A x x 0113 203.218
3 8-1 Mains switch with thermal fuse (120 V vers.), 12 A x x 0113 203.080
4 8-2 Mains input module 10 A 250 V (230 V vers.)
with fuse holder
x x x x 0113 200.170
4 8-2 Mains input module 10 A 250 V (120 V vers.) x x x x 0113 200.693
8-3 Fuse holder for mains input module (230 V) x x x x 0113 200.189
8-3 Fuse holder for mains input module (202 V) x x x x 5820 850.434
3 8-4 Interference filter, 6Ek3 x x x x 5810 627.001
8-5 Retrofit PCB Interference mains filter, 120 V,
5804/5804 R
x x 5810 855.012
Fig. Pos. Designation
5804 5804 R 5810 5810 R
Part no.
KS/1009