10
5 Description of menus
5.2 Start
Only programs can be started from the "Start" menu.
The program displayed in the processing level can be started directly by pressing the key (1).
If a program which has been stored has to be started, it is selected with the cursor keys from the displayed list
after has been pressed (2) and cofirmed by pressing .
The "Start" menu has no sub-programs.
5.3 FILES
The "FILES" menu is used to change, load, create or delete programs.
5.3.1 Edit
The "Edit" menu is used to change existing programs. The program which is to be changed may already be in
the "processing level" or it is loaded into the processing level via the "Load" menu. This is applicable for
programs from the internal device memory or from a personal card.
The program which has been changed can be checked by pressing the key after the program has been
saved under a new name. The processing level is not deleted when this program is saved. The program data
remains stored even when the device is switched off and is overwritten only when the "New" or "Standard"
sub-menu is called up.
Note
:
If the program which has been changed (without being saved under a new name) is started, there are
then two different programs with the same name (one in the internal memory and one in the processing level).
Main-Menu
Start STANDARD
FILES . . TEST1
OPTIONS . . TEST2
Lid
Incubate
STANDARD
– –/25.0°
Main-Menu
Start
FILES . .
OPTIONS . .
Lid
Incubate
Running/STANDARD
95.0/94.7°
Main-Menu
Start
FILES . .
OPTIONS . .
Lid
Incubate
Running/TEST2
– –/25.0°
Main-Menu
Start
FILES . .
OPTIONS . .
Lid
Incubate
STANDARD
– –/25.0°
(1)
(2)
Processing level
Main-Menu
Start
FILES . .
OPTIONS . .
Lid
Incubate
STANDARD
– –/25.0°
FILES . .
Edit
Load
Standard
New
Delete
STANDARD
– –/25.0°
To Next Page
Loading...