EasyManua.ls Logo

Eppendorf Mastercycler Gradient - General Settings: Clock, Remote, Sound

Default Icon
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
5 Description of menus
5.4.4 GENERAL
To enter general settings and to test the device.
Clock
Format: The time in the 24-(military) or 12-hour-clock format (choice of PM or AM) can be
selected using the key.
Time: To enter the current time in hours:minutes:seconds.
Date: To enter the current date as day/month/year.
The month can be selected using the key.
Remote
Baud rate: The transmission rate of 19,200, 9,600, 4,800, 2,400 or 1,200 for a
PC connection can be selected using the key.
Sound
KeyClick: ON: Every keyclick is confirmed by an acoustic signal.
OFF: The acoustic signal for keyclicks is switched off.
Warnings: ON: In addition to the warning text, warnings are acknowledged by an
acoustic signal.
OFF: No acoustic signal is emitted to acknowledge a warning.
Note:
Errors are always acknowledged by an acoustic signal,
irrespective of this setting.
Etc
Start with: MAIN: After the device has been switched on, the main menu appears
in the display.
LAST: After the device has been switched on, the most-recently used
menu appears in the display.
Auto Restart: YES: In the event of a power failure, an active program continues when the
power supply is restored within three minutes. The time and the stage
at which the program was interrupted appear in the display:
When any key is pressed, the program continues from the point at
which it was interrupted. If the program is to be cancelled, press the
key and confirm by pressing .
NO: In the event of a power failure, an active program is cancelled.
GENERAL . .
Clock
Remote
Sound
Etc
VALID . .
– –/22.0°
AutoRestart!
PROGRAM restarted:
Time Date
Step:x Cyc:y
Press any key!

Related product manuals