Eppendorf Mastercycler Gradient - Processing Programs via Personal Card

44
9 Personal card
9.3 Processing programs
Starting a program from a card
– Select the "Start" menu item and call up by pressing .
– Select 〈 MCARD 〉 and call up by pressing .
If the memory name
〈
INTERN
〉
appears in the display instead of
〈
MCARD
〉
, this means that the program
memory of the personal card has already been opened.
– Select a program and call up by pressing .
Note: For starting purposes, programs are not loaded into the internal memory or into the "Edit" processing
level. After the program has ended, the program which has been started by the card is no longer available on
the device.
Deleting a program from a card
– Select the "FILES/Delete" menu and call up by pressing .
– Select
〈
MCARD
〉
and call up by pressing .
If the memory name
〈
INTERN
〉
appears in the display instead of
〈
MCARD
〉
, this means that the program
memory of the personal card has already been opened.
– Select a program and delete by pressing .
Loading a program from a card into the processing level
– Select the "FILES/Load" menu and call up by pressing .
– Select 〈 MCARD 〉 and call up by pressing .
If the memory name
〈
INTERN
〉
appears in the display instead of
〈
MCARD
〉
, this means that the program
memory of the personal card has already been opened.
– Select a program and load by pressing .
Saving a program on a card
– After a program has been compiled or modified, exit the processing level by pressing .
– Confirm the inquiry "Save: YES" by pressing .
– For the inquiry "Target:INTERN", select
〈
MCARD
〉
using the key and confirm by pressing .
– Enter the program name (max. 8 characters) and confirm by pressing .
Note: The program can be saved under the same name as in the memory of the Mastercycler.
Programs with LINK commands
A program cannot be started from a personal card if it contains program branching – LINK commands – to
other programs on the personal card. It is possible to start the program if branching to another program in the
internal memory of the devices is available.
A program from the internal memory cannot call up a program from the personal card using a LINK command.