Eppendorf Mastercycler nexus - System Management; Administrator Functions; Managing User Accounts

System management
Mastercycler
®
nexus
English (EN)
67
8System management
8.1 Administrator functions
The Mastercycler nexus software differentiates between default users and the administrator. All users and
the administrator need a PIN to log into the device. Users can only make changes to their own accounts.
The administrator has write access to all areas. If you deactivate the PIN function, all users automatically
have administrator rights and can make changes to all user accounts (see p. 70).
The access rights differ as follows:
8.2 Managing user accounts
8.2.1 Creating a user account
Prerequisites
If the PIN function is activated: logged in as an administrator
You can set up a user account for each user:
1. In the navigation tree, mark the Eppendorf node (at the top).
2. Press the NewUser softkey.
The New User window appears.
Procedure Default users Administrator
Copying programs From each user node to own user
node
From each user node to each user
node
Creating, deleting, editing and
starting programs
Only programs below their own
user node
All programs
Managing user accounts and
generating PINs
Only change own user name and
PIN
Create, change, delete user
accounts. Change the PIN for
each user.
Making system settings None All
Performing the self test,
verification and adjustment
Self test and verification only Self test, verification and
adjustment
Performing backups, restores and
software synchronizations
Only backups All
•A user name can only be assigned once.
•The administrator uses the set user name _admin.