SYSTEM CONFlG.
This Level 1 option includes the following eight submenus:
Menu/submenu
6
SYSTEM CONFIG.
Available options
b
FULL PRINT
T-OFFSET
L-OFFSET
MEMORY LEFT
LOAD MACRO
SAVE MACRO
DELETE MACRO
PowerOn MACRO
See descriptions for FULL PRINT, OFFSET, MACRO, and
MEMORY LEFT in this chapter.
TONER
Use this Level 2 option to display the amount of toner left in the
imaging cartridge and to reset the toner setting (the number of
asterisks between the E and F) after you install a new imaging
cartridge.
Menu/submenu
4
TONER E*****F
Available options
b NEW (New cartridge)
E
*****F* (100-80%)
E
****F (80-60%)
E***F (6040%)
E** F (40-20%)
E*F (20-0%)
When you check TONER because your printed images become
faint and the message shows only 1 asterisk, you must change
your imaging cartridge. See “Replacing the Imaging Cartridge”
in the
Setup and Maintenance
guide.
4-26
SelecType
To Next Page
Loading...
