SelecType tutorial
1.
Note that the first thing you will see on the display before
entering SelecType is:
READY
: P LJ-2P
For the ActionLaser 1500, you will see READY:P 3/P/Si.
Make a note of the interface channel, for example,
P=parallel. You may need this information later.
2.
Press the
LEVEL1
button to enter SelecType Level 1.
3.
The main menu option appears. The
b
icon indicates that
you can enter the submenu by pressing . In many cases,
the display also shows the current setting, as shown below.
+
INPUT
AUTO LT
b
4.
Enter the options submenu by pressing
)
.
INPUT
+
AUTO LT b SET
+
indicates the option is selected.
5.
Display the other submenu options by pressing
A
or
v
.
INPUT
4
STD
b
SET
#
indicates the option is not selected. The message on the
right,
b
SET,
indicates you can select the option displayed
by pressing b .
SelecType 4-5
To Next Page
Loading...
