Indicator lights
ON LINE
CONTINUE
FEED
On when the printer is on line, indicating
that the printer can receive and print data.
Flashes when an error is detected or a
maintenance procedure is needed. The
error message appears on the display at
the same time.
On when data is received and stored in the
printer’s buffer without being printed out.
Rapid flashing indicates the printer is
receiving data from the computer.
Buttons
The top three buttons on the control panel function as follows:
SelecType
LEVEL 1
Enters SelecType Level 1. See “SelecType,”
Chapter 4.
LEVEL 2
Enters SelecType Level 2. See “SelecType,”
Chapter 4.
ON LINE/EXIT
Switches the printer between on line and
off line status. This switch is disabled
when the printer is in SelecType mode.
Exits SelecType mode.
Controlling Your Printer
1-3
To Next Page
Loading...
