Epson 1000 - Initialization

Initialization
There are four types of printer initialization (returning the
printer to a fixed set of conditions): initialize, reset, load macro,
and factory reset.
Initialize
The SelecType Level 1 settings return to the power-on default
settings, received print and downloaded font data clears, and
the power-on default conditions return when:
Q The printer is turned off, then back on after at least five
seconds.
0 You press RESET until the display shows INITIALIZE.
Reset
Received print data clears and the SelecType Level 1 settings
return to the settings in the previously-loaded macro (or to the
power-on default settings if you have not executed the LOAD
MACRO option) when:
Q You press RESET so that the display shows RESET.
Q You send the RESET software command to the printer.
Loud macro
The SelecType Level 1 settings change to the settings in the
loaded macro when:
CI You execute the LOAD MACRO setting in the SelecType
Level 1 SYSTEM CONFIG. menu.
Technical Specifications A-15