ldentity Cards
An identity card allows you to operate your printer in an
optional printer emulation.
Note:
You cannot use identity cards #5690 and #5691 with this printer.
You can also use optional font cards in slot A.
Epson PostCript card
Follow these guidelines when using the optional Epson
PostScript identity card.
Ll
The PostScript emulation requires at least 1.5 megabytes
(MB) of RAM. This means you need to add at least 1.0MB
RAM to an ActionLaser 1000 or 0.5MB RAM to an
ActionLaser 1500 before you can use PostScript. See “The
Memory Chip Sets” later in this chapter.
Q
You must select PostScript (PS) emulation with the
SelecType Level 2 EMULATION setting. You can select the
PS emulation for one channel at a time only.
Options 5-5
To Next Page
Loading...
