Checking the RITech setting
1.
Enter SelecType Level 2 by pressing the
LEVEL 2
button.
2.
Press
v
until RITech and the current RITech setting appear
on the display.
3.
Press
b
three times. The printer prints the check pattern.
4.
Look at your check pattern to see if your current setting is
correct. The check pattern is a rectangle with a pattern
inside it, as shown below. When the RITech setting is best,
you cannot see the pattern inside the rectangle.
RITech
RITech
Incorrect
Correct
Note:
RITech may not improve graphics that include gray shading or a
screen pattern.
If
you are printing such graphics, you may want to
turn RITech off.
After you print a RITech pattern, SelecType Level returns to the
default settings and the printer clears its memory including any
downloaded font data.
1-20
Controlling Your Printer
To Next Page
Loading...
