EPSON Perfection 1240U Revision A
Assembly and Disassembly Disassembly Procedures 32
9. Remove the Lamp Cover from the Carriage Cover.
10. Remove the Inverter Lamp from the carriage cover.
Figure 4-11. Inverter Lamp Removal (1)
Figure 4-12. Inverter Lamp Removal (2)
C H E C K
P O I N T
• When installing the Inverter Lamp, be sure to
connect it to the hook on the Carriage Cover.
• When removing the Inverter Lamp, be careful not to
touch the Inverter Lamp directly.
• The Inverter Board will be warm immediately after
the power is turned off, so wait for it to cool
sufficiently before removing it.
Catches
Carriage Cover
Lamp Cover
Carriage Cover
Inverter Lamp
Inverter Board
Lamp Cover
To Next Page
Loading...
