Epson 1240U - Carriage Unit Removal

EPSON Perfection 1240U Revision A
Assembly and Disassembly Disassembly Procedures 33
4.2.5 Carriage Unit Removal
1. Release the Carriage Lock. (See Section 4.2.1.)
2. Remove the Document Cover. (See Section 4.2.2.)
3. Remove the Upper Housing. (See Section 4.2.3.)
4. Remove the Clip Shaft.
5. Raise the Carriage Unit slightly to remove it from the timing belt,
remove the Carriage Guide Shaft, and then remove the Carriage
Unit.
Figure 4-13. Carriage Unit Removal (1)
Figure 4-14. Carriage Unit Removal (2)
Figure 4-15. Carriage Unit Removal (3)
Clip Shaft
CR Shaft