EPSON Perfection 1240U Revision A
Assembly and Disassembly Disassembly Procedures 34
6. Remove the six screws (gold, CBP, M3x8), and then remove the
Main Circuit Board Shield Plate.
7. Use a standard screw driver to remove the Ferrite Core.
8. Disconnect the FFC Cable (white) from the Main Circuit Board.
Figure 4-16. Shield Plate Removal
Figure 4-17. Ferrite Core Removal
6. CBS Screw (M3x8)
6. CBP Screws (M3x8)
6. Main Board Cover
FFC Cable
Ferrite Core
To Next Page
Loading...
