Epson 1240U - Page 37

EPSON Perfection 1240U Revision A
Assembly and Disassembly Disassembly Procedures 37
8. Follow the steps below to remove the Timing Belt from the CR Motor
Unit.
1) Remove the E-ring from the transmission gear.
2) Remove the transmission gear.
3) Remove the E-ring from the drive pulley.
4) Remove the drive pulley.
Figure 4-22. Timing Belt Removal
Figure 4-23. Parts in the CR Motor Unit
Timing Belt
Drive Pulley
Transmission Gear
E-ring
Transmission Gear
E-ring
Timing Belt
Drive Pulley