EPSON Perfection 1240U Revision A
Assembly and Disassembly Disassembly Procedures 39
6. Remove the two screws (CP, M3x5) securing the Main Board.
7. Disconnect the following cables from the corresponding connectors;
CR Motor - CN3, carriage FFC, Panel Board - CN4.
8. Remove the Main Board.
Figure 4-25. Main Board Removal (2)
Figure 4-26. Main Board Removal (3)
Figure 4-27. Main Board
CP Screw (M3x5)
Carriage FFC Connector
CN3 (CR Motor)
CN4 (Panel Board)
To Next Page
Loading...
